The best EMC certification E20-818 exam training mode released

In order to meet the needs of each candidate, the team of IT experts in DumpLeader are using their experience and knowledge to improve the quality of exam training materials constantly. We can guarantee that you can pass the EMC E20-818 exam the first time. If you buy the goods of DumpLeader, then you always be able to get newer and more accurate test information. The coverage of the products of DumpLeader is very broad. It can be provide convenient for a lot of candidates who participate in IT certification exam. Its accuracy rate is 100% and let you take the exam with peace of mind, and pass the exam easily.

It was a Xi'an coach byword that if you give up, the game is over at the same time. The game likes this, so is the exam. Not having enough time to prepare for their exam, many people give up taking IT certification exam. However, with the help of the best training materials, you can completely pass EMC E20-818 test in a short period of time. Don't you believe in it? DumpLeader real questions and answers are the materials that it can help you get high marks and pass the certification exam. Please try it.

Exam Code: E20-818
Exam Name: EMC (Symmetrix Solutions Expert Exam for Implementation Engineers)
One year free update, No help, Full refund!
Total Q&A: 161 Questions and Answers
Last Update: 2014-01-27

You feel tired when you are preparing hard for EMC E20-818 exam, do you know what other candidates are doing? Look at the candidates in IT certification exam around you. Why are they confident when you are nervous about the exam? Is your ability below theirs? Of course not. Have you wandered why other IT people can easily pass EMC E20-818 test? The answer is to use DumpLeader EMC E20-818 questions and answers which can help you sail through the exam with no mistakes. Don't believe it? Do you feel it is amazing? Have a try. You can confirm quality of the exam dumps by experiencing free demo. Hurry up and click DumpLeader.com.

Now there are many IT training institutions which can provide you with EMC certification E20-818 exam related training material, but usually through these website examinees do not gain detailed material. Because the materials they provide are specialized for EMC certification E20-818 exam, so they didn't attract the examinee's attention.

DumpLeader EMC E20-818 exam materials contain the complete unrestricted dump. So with it you can easily pass the exam. DumpLeader EMC E20-818 exam training materials is a good guidance. It is the best training materials. You can use the questions and answers of DumpLeader EMC E20-818 exam training materials to pass the exam.

DumpLeader's EMC E20-818 exam training materials is virtually risk-free for you at the time of purchase. Before you buy, you can enter DumpLeader website to download the free part of the exam questions and answers as a trial. So you can see the quality of the exam materials and we DumpLeaderis friendly web interface. We also offer a year of free updates. If you do not pass the exam, we will refund the full cost to you. We absolutely protect the interests of consumers. Training materials provided by DumpLeader are very practical, and they are absolutely right for you. We can make you have a financial windfall.

The site of DumpLeader is well-known on a global scale. Because the training materials it provides to the IT industry have no-limited applicability. This is the achievement made by IT experts in DumpLeader after a long period of time. They used their knowledge and experience as well as the ever-changing IT industry to produce the material. The effect of DumpLeader's EMC E20-818 exam training materials is reflected particularly good by the use of the many candidates. If you participate in the IT exam, you should not hesitate to choose DumpLeader's EMC E20-818 exam training materials. After you use, you will know that it is really good.

E20-818 Free Demo Download: http://www.dumpleader.com/E20-818_exam.html

NO.1 A Microsoft SQL Server database administrator wants to execute backups using Solutions Enabler SRM
functionality. Which ODBC variable(s) needs to be set to enable the symioctl and symrdb command set?
A.SYMCLI_RDB "CONNECT" and "TYPE" environment variables
B.SYMCLI_RDB "NAME" and "TYPE" environment variables
C.Only the SYMCLI_RDB "Connect" to the database "username/password"
D.Only the SYMCLI_RDB "TYPE" variable to "sqlserver"
Answer:A

EMC   E20-818   E20-818   E20-818 certification training   E20-818

NO.2 A new Cascaded SRDF customer is running in SRDF/A mode from the source (R1) site to the
disk-based secondary (R21) site. In this scenario, which SRDF mode is permitted between the R21 and
the R2 sites?
A.Adaptive Copy Disk
B.Adaptive Copy Write Pending
C.Synchronous
D.Asynchronous
Answer:A

EMC study guide   E20-818 test   E20-818   E20-818   E20-818 dumps   E20-818 exam dumps

NO.3 An SRDF/Star solution has been proposed. The customer is slow to accept the solution because they
are concerned about the reliability of the RDF daemon.
How would you address the customer's concern?
A.RDF daemons will be deployed on multiple management stations at the workload site. The RDF
daemons will cooperate with each other.
B.RDF daemon process runs on the Symmetrix array and has built-in redundancy.
C.RDF daemon process runs on the Symmetrix array. If the workload site RDF daemon fails, the RDF
daemon from one of the other sites will take over.
D.RDF daemons will be deployed on one management station at each of the three sites. If the workload
site RDF daemon fails, one of the RDF daemons from the other two sites will take over.
Answer:A

EMC pdf   E20-818 exam simulations   E20-818 exam dumps   E20-818

NO.4 Click the Calculator icon in the upper left-hand corner.
A customer is migrating their SQL server from a NAS back end to a new RAID 1-protected Symmetrix
V-Max SE array. Perfmon was used to create a log view of an average day's activity against the database
LUN as represented in the exhibit. Unfortunately the database's data file and transaction log are located
on the same LUN. The database administrator has informed you that this database typically processes 25
GB worth of transactions over the course of their 12-hour business day.
Which discount in IOPS should be taken before determining the number of spindles required for the data
file LUN?
A.75
B.152
C.176
D.365
Answer:A

EMC   E20-818 certification training   E20-818

NO.5 Refer to the Exhibit.You have been asked to configure a Cascaded SRDF solution at a customer site.
The production site will be at Site A, the synchronous target will be at Site B, and the asynchronous target
at Site C.
Which kind of RDF devices will be needed at each site?
A.R1 at Site A, R21 at Site B, and R2 at Site C
B.R11 at Site A, R21 at Site B, and R22 at Site C
C.R11 at Site A, R21 at Site B, and R2 at Site C
D.R1 at Site A, R2 at Site B, and R21 at Site C
Answer:A

EMC   E20-818 original questions   E20-818 dumps

NO.6 A customer has implemented Microsoft Exchange Server 2007 in an SRDF environment with replicas
being taken at the disaster recovery (DR) site. During testing of this solution, they have failed over
Exchange operations to the DR site. The Exchange mailbox server appears to come online, but user
mailboxes are inaccessible. The Exchange Management Console shows all mailboxes marked with a
small red "x" over the mailbox icons.
Which course of action will resolve this issue?
A.Ensure the Exchange mailbox server at the DR site can communicate with an Active Directory Domain
Controller
B.Recover the database from the BCV copies available at the DR site
C.Ensure that the World Wide Web service on the Exchange server at the DR site has started
successfully
D.Recover the database from the remote BCV copies available at the primary site
Answer:A

EMC dumps   E20-818   E20-818

NO.7 A customer has been creating replicas of several Microsoft Exchange mailbox servers using Replication
Manager. They have recently added a new Exchange Server 2007 mailbox host to the environment.
In addition, the customer has created a scheduled job to create replicas of five storage groups in
consecutive order. Since doing so, they notice that the newly added replica jobs seem to take a very long
time to complete.
What is the source of the problem?
A.NTFS volumes containing the databases were not formatted with the correct cluster size
B.Replication Manager job should have been configured to create the replicas simultaneously
C.Latest Replication Manager Client Service Pack was not installed on the Exchange server
D.Exchange management utilities were not installed on the Replication Manager mount host
Answer:A

EMC   E20-818   E20-818 test questions

NO.8 As reflected in the exhibit, a customer has a Cascaded SRDF/Star environment. Site B fails and they
undertake a reconfiguration to provide remote data protection between Sites A and C.
What is used to determine the invalid tracks that must be moved from Site A to Site C?
A.Inclusive OR of two SDDF bitmaps at Site A
B.Inclusive OR of two SDDF bitmaps at Site A and a bitmap at Site C
C.Inclusive OR of two SDDF bitmaps at Site B
D.Inclusive OR of two SDDF bitmaps at Site C
Answer:A

EMC certification training   E20-818 certification   E20-818 exam simulations   E20-818   E20-818 test

NO.9 A customer has three data centers that are used to run SRDF/AR multi-hop on Symmetrix DMX-4
arrays.
Production is located at Site A
Secondary site is located at Site B
Tertiary site is located at Site C
In the event of a Site A failure, the customer wants to be able to fail over to Site C while retaining the
ability to have remote data protection. Which solution will offer the best RPO and RTO for this customer?
A.Cascaded SRDF
B.Latest version of SRDF/AR
C.Concurrent SRDF
D.SRDF/EDP
Answer:A

EMC   E20-818   E20-818

NO.10 A customer is planning an SRDF/Star configuration as shown in the exhibit. The customer wants to
switch production to the synchronous target in the event of a workload site fault.
In addition to the Base and SRDF Solutions Enabler licenses, which licenses are recommended at the
synchronous target?
A.TimeFinder/Clone and TimeFinder/CG
B.TimeFinder/Mirror and TimeFinder/Clone
C.TimeFinder/Snap and TimeFinder/CG
D.TimeFinder/Snap and TimeFinder/Mirror
Answer:A

EMC   E20-818 test questions   E20-818 test answers

NO.11 An Microsoft Exchange administrator has recently encountered an issue with one of the databases in
their Exchange 2007 environment. The decision was made to perform a partial restore of only the single
database.
Based on EMC and Microsoft best practice, what are the proper ordered steps needed to complete this
task?
A.1) Dismount all databases in the storage group. 2) Restore the database replica. 3) Remove the .chk
file from the system path folder. 4) Remount all databases in the storage group.
B.1) Remove the .chk file from the system path folder. 2) Dismount all databases in the storage group. 3)
Restore the database replica. 4) Remount all databases in the storage group.
C.1) Dismount all databases in the storage group. 2) Remove the .chk file from the system path folder. 3)
Restore the database replica. 4) Remount all databases in the storage group.
D.1) Dismount all databases in the storage group. 2) Remove the .chk file from the system path folder. 3)
Remount all databases in the storage group. 4) Restore the database replica.
Answer:A

EMC questions   E20-818   E20-818

NO.12 A customer wants to use TimeFinder/Exchange Integration Module (TF/EIM) to create daily local
replicas of a critical Microsoft Exchange 2007 mailbox server. Using Terminal Services, they connect
remotely to the backup server and execute the following command:
exbackup2007 -v -vss -s [servername\] -preestablish
The command runs up until the point where TF/EIM attempts to mount the volumes, then it fails. Why is
the process unable to complete?
A.Exbackup is not supported using a terminal session
B.Correct VSS Provider was not installed
C."copyonly" switch must be specified the first time a backup is run
D.Exbackup does not have the permissions needed to run on the backup host
Answer:A

EMC practice test   E20-818 certification training   E20-818   E20-818   E20-818 study guide

NO.13 A customer wants to use Replication Manager to replicate and mount, at the file group level, a Microsoft
SQL Server database. What must be done before creating a Replication Manager file group replication
job?
A.Ensure no other data files are on the same volume with the selected file group
B.Copy the log files along with the file group data files
C.Use the recover database option when mounting a file group
D.Create a TimeFinder device group that contains only the file group data files
Answer:A

EMC   E20-818 demo   E20-818   E20-818

NO.14 A customer is migrating their Microsoft Exchange 2007 server from a NAS back end to a new
Symmetrix V-Max SE array. As illustrated in the exhibit, perfmon was used to create a log view of an
average day's activity against the database LUN of the busiest datastore in the Exchange environment.
This will serve as the performance benchmark for all other database LUNs. There are an additional four
mailbox databases on this server.
How many RAID 1-protected 15k rpm spindles are required to satisfy the performance needs of the
customer for all the mailbox databases on this server?
A.10
B.26
C.38
D.50
Answer:D

EMC   E20-818 practice test   E20-818 exam prep   E20-818

NO.15 In the event of a physical disk spindle failure, how would a customer with Microsoft SQL Server
maximize availability?
A.Logs should be on RAID 1 volumes with data volumes on separate RAID 6 volumes
B.Logs should be on RAID 1 volumes with data volumes on separate RAID 5 volumes
C.Logs and data files should be on separate RAID 5 volumes
D.Logs and data files should be on separate RAID 1-protected volumes
Answer:A

EMC   E20-818   E20-818   E20-818   E20-818 certification training

NO.16 A customer's SQL database has been experiencing performance degradation every time a particular
query is run. When designing the storage layout, all user databases were properly sized according to
EMC best practices.
Which storage configuration could be the source of the problem?
A.Tempdb and user databases are sharing spindles
B.MDF and LDF files are not sharing spindles
C.RAID 5 protection has been used for Tempdb
D.Data files are spread over striped metavolumes
Answer:A

EMC certification   E20-818 exam simulations   E20-818 certification training   E20-818 original questions

NO.17 Group Name Services (GNS) is enabled in an SRDF/Star solution. What is a benefit of GNS in a
SRDF/Star environment?
A.Facilitates management of SRDF/Star when there are multiple management hosts at each location
B.Distributes the Star internal definition file to the Symmetrix arrays at both target locations
C.Propagates the composite group definitions over SRDF links
D.Restarts the SRDF daemon in the event it stops unexpectedly
Answer:A

EMC   E20-818   E20-818 dumps   E20-818 Bootcamp   E20-818 certification training

NO.18 A customer wants to provide remote disaster recovery (DR) for several critical mailbox servers in their
Microsoft Exchange Server 2007 environment. Local recoverability is provided by creating replicas of their
critical databases.
The customer's DR site is located 20 km away. They have already provisioned the necessary failover host
on the DR site, as well as the required Active Directory infrastructure needed to support a failover.
However, they want to minimize the total number of database copies required to provide basic failover
capabilities for the Exchange server.
Which solution would you recommend to provide remote point-of-failure recovery with the fewest local
and remote database copies?
A.R1-R2-BCV
B.Mixed Mirroring
C.STD-R1BCV-R2-BRBCV
D.STD-R1BCV-R2
Answer:A

EMC   E20-818 answers real questions   Braindumps E20-818   E20-818   E20-818

NO.19 A composite group spanning two Symmetrix arrays is set up to run SRDF/Star using Cascaded SRDF
as illustrated in the exhibit. What is one of the necessary conditions before the SRDF daemon at Site A
will perform an MSC cycle switch?
A.Transmit delta sets from Site B to Site C have finished
B.SDDF bitmaps have been swapped at Site A
C.Invalid track count between Sites A and C is less than 30000
D.SYMCLI_STAR_ALLOW_CASCADED_CONFIGURATION option must be enabled in the option file
Answer:A

EMC original questions   E20-818 dumps   E20-818 practice test   E20-818

NO.20 A customer is running Concurrent SRDF/Star. The disaster recovery (DR) plan allows for the workload
to be switched to either the synchronous site or the asynchronous site. In addition, part of their DR plan is
to enable SRDF/Star protection once the workload site comes back online.
Which advice should be given to the customer?
A.If production fails over to the synchronous site, it is possible to run in a Star-protected configuration after
the return of the original workload site.
B.If production fails over to either the asynchronous site or synchronous site, it is not possible to run in a
Star-protected configuration from either site after the return of the original workload site.
C.If production fails over to either the asynchronous site or synchronous site, it is possible to run in a
Star-protected configuration from either site after the return of the original workload site.
D.If production fails over to the asynchronous site, it is possible to run in a Star-protected configuration
after the return of the original workload site.
Answer:A

EMC questions   E20-818   E20-818   E20-818 test questions

DumpLeader offer the latest 00M-622 exam material and high-quality 1D0-610 pdf questions & answers. Our 642-997 VCE testing engine and 1Y0-300 study guide can help you pass the real exam. High-quality NS0-156 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.dumpleader.com/E20-818_exam.html